Travertine Only WB WPT-300
New, State of the Art water based formula that reduces slipperiness on Travertine, dry or wet. Strongly increasing stain resistance.
WPT-300 is the first professional solution formulated specifically for travertine to reduce slipperiness while preventing/minimizing stains, preserving the natural look of travertine. Reapplication can be done at any time. WPT-300 is easily applied with a pump up sprayer.
WPT-300 exhibits remarkable performance at preventing slipperiness on all finishes of travertine while protecting the surface with a powerful matrix that resists staining, dirt pick-up, weathering, water entry, and wear. WPT-300 is water-based complex that is both film forming and penetrating. It is a silica based highly advanced treatment that builds two protective levels, both a protective, micro-engineered film on the surface and a penetrating, binding protective layer inside the surface pores.
-
Dramatically Reduces Slipperiness
Waterproofs
Strong Stain Resistance
Deep Penetrating Formula
Naturally Self Cleaning
Low VOC Content
State-of-the-Art Formula
-
Honed, Filled or Unfilled
Polished
Tumbled
Brushed
-
Cures in 1 to 2 hours
May slightly darken (enhance)
Single coat
Matte finish
Safe, easy to apply
Resealable
-
Coverage will vary, approx. 300 sq. ft. - 450 sq. ft. per gallon.
-
Indoors and Outdoors
Horizontal and Vertical
DO NOT APPLY ON FOOD AREA
-
Quart Bottles
One Gallon Bottles
Five Gallon Pails
This product is compliant with the following national, state, and district AIM VOC regulations, US environmental Protection Agency, California Air Resources Board SCM Districts, South Coast Air Quality Management Districts, Maricopa County AZ, and Northeast Ozone Transport Commission.
